ian nicol asked:


The term “sea fishing tackle” is a general term that covers all equipment used by fishermen when they go fishing at sea.

When we talk about sea fishing tackle, we are actually referring to all the equipment that fishermen use when they go out to the sea to fish. The term “sea fishing tackle” is a rather general term, since it is used on different kinds of fishing gear and equipment.

What exactly are we talking about when we speak of sea fishing tackle? Below is a rundown of what makes up the basic sea fishing tackle that anglers ought to have with them on their fishing trips.

1. Fishing rod and reel. Naturally, the first thing that comes to mind on the topic of sea fishing tackle is the fishing rod and the accompanying reel. This is the most basic item in a fisherman’s gear because one simply cannot fish without it. The rod and the reel can be bought separately from a local tackle store, but they often come as a set. The rods used for saltwater fishing are often six feet long or more.

2. Fishing line. The fishing line is the cord used to reel in the catch. It comes in different strengths or pound-tests. What pound-test fishing line you should buy depends on the kind of fish you are planning to catch and the bait you want to do it with. Typically, the more popular fishing lines have a pound-test of eight to 16.

3. Fishing net. The net is used not to catch the fish but to land them. However, it can be handy for catching bait, such as minnows and frogs.

4. Bait. Baits come in a wide variety of forms and colours. They are either live or artificial. Live bait can be earthworms, minnows, crab or shrimp. Artificial baits are often made of plastic.

5. Hooks. The hooks hold the fish that go for the bait. The size of the hook that you should use depends on the size of the fish you are going for.

6. Bobbers. The bobber is supposed to dangle the bait to the fish and to put a bit more weight to your cast. When it sinks, it means there is a catch at the end of the line.

7. Sinkers. Sinkers add weight to the line to prevent it from floating to the water’s surface. The good ones weigh only a pound and are free from lead.

8. Leaders. Leaders are bits of metal that you attach to your line to protect it from being cut by toothy or sharp-gilled fish.

9. Swivels. Swivels are attached to the line and are sometimes used to hold the bait, the leader and the hook instead of being tied directly to the line. A swivel keeps the line from tangling and makes it easier to remove leaders without cutting the line.

10. Utility knife. A knife is used for a variety of tasks when fishing. They can be used to cut tangled lines, clean fish and making fillets.

11. Tackle box. The tackle box is the container where you store all the small items that make up your sea fishing tackle. It is always best to keep the tackle box organised.

There are a lot of items that make up sea fishing tackle. All these items that are called sea fishing tackle are essential to having a fun and productive time of fishing at sea.

Ernest Tang asked:


Tying a high quality fly fishing knot is an important aspect of a repertoire for a fly fisherman in order to catch the ideal fish. The line is basically consisted of different lines on top of the fly at the tail end; consequently tying a good knot is a requirement so as not to make it come loose when you are out on your fishing voyage. Otherwise there will be gloomy tale to tell of the fishes that get away.

So how to tell what is a good knot? The mark of one is that it will not become slacken when you are battling with the fish. To do so, a good practice is to moisten it by applying water or saliva, then tighten it with a firm pull to enable it to be snug firmly throughout the whole knot. That is the correct method if the fish will to drag in one direction; it will not cause the line to sever as the knot is consistently tightened.

After strengthening the knot, it is vital to check every knot to make certain that there is no abrasion. If not the fisherman has to redo it so that it can face up to the test. When you discover that a line is torn or worn out, then it is time to get a new one or the knot will cause you to lose your catch. Every part of the line and knot have to be in ideal state or you will never get the best fly fishing knot irrespective of your tying skill.

Perhaps we can examine certain types of knots in order to get the fishing line equipped and all set up. Nearest to the reel, we have the Arbor knot that is most frequently employed to unite backing of the spool to the reel. After which, you utilize an Albright knot to fasten the backing to the fly line. That can create a problem as generally the lines are constructed of dissimilar materials. The next fly fishing knot to consider is the Nail knot as it joins the leader to the fly line and it is a very important knot as it is what turns the fly over at casting. The next to take note is the Double Surgeon’s fly knot that ties the tippet to the leader. Finally, the Improved Clinch fly fishing knot is for most part employed to connect the tippet to the fly, therefore the job of tying the fly fishing line is done.

Michelle Bery asked:


Everyone knows the basics of fishing. There’s a rod, reel, fishing line, hook, bait; you cast the line, wait for a bite, and reel in your dinner. Experienced fishermen know there is more to it than that, but for most of us that description appropriately sums it up. However, there are many types of fishing, such as salt water and fresh water, and perhaps the most artful of them all, fly fishing. You have probably heard of fly fishing – it has been in recorded history for nearly 2000 years – and you probably know that it does not involve fishing for flies, but if that is all you know then a primer in fly fishing basics can bring you up to speed.

Unlike other forms of fishing, fly fishing does not typically use any kind of organic bait, live or dead. Instead, fly fisherman use artificial flies – ribbon, string, hair, feathers – as a lure to attract fish. The artificial flies are attached to the hook and line, and the fisherman attracts fish with movement that makes the fly look like an insect that is moving on or above the surface of the water. The nature of that artificial bait is the first and most important element to understand when examining fly fishing basics.

Another aspect of fly fishing basics, an aspect that separates fly fishing from most other variations of fishing, is the way the line is cast. Other kinds of fishing rely on casting a line and attracting fish with the bait, but fly fishing requires a much more skillful method of luring the fish. A fly fisherman casts his lure toward the fish and uses rhythmic movements to make the lure fly above the water, skimming the top, or even diving under the surface, all in an effort to replicate the movements of an insect that might entice a hungry fish to strike.

If you understand fly fishing basics, you might wonder what you need to give it a try. Fly fishermen usually use rods that are longer and lighter than typical fishing rods. The reel used is typically quite simple because it is generally used only to retrieve the hook and lure – and hopefully a fish! Before casting, fly fishermen usually create slack in the line by pulling some from the reel. That slack allows the lure to fly freely to the targeted area. Choosing the proper lure is another aspect of fly fishing basics that one should understand before setting off to cast their line.

Fly fishing implies that the lure is intended to resemble the characteristics of flies, but fly fishing is hardly limited to that. The sport has evolved in recent years, and many fly fishermen now choose lures and casting techniques that mimic the primary prey of the fish they are attempting to catch. However, specific baits and the eating characteristics of various species of fish are beyond the realm of fly fishing basics.

An understanding of fly fishing basics is not enough to prepare one to head off to the nearest lake or stream. If you are interested in expanding your knowledge, or trying fly fishing yourself, spend some time reading on the subject, and if possible seek the tutelage of an experienced fly fisherman. Only then can you begin to understand more than fly fishing basics, such as specific recommendations on rods, reels, line weight, lures, and most important, the great places where fly fisherman must make a pilgrimage.



Posted by Glen

Cecilia Valenzuela asked:


ng enthusiasts can be found in the desert southwest. This sport is a way of life for some, who make this their career.

In the area considered to be the southwestern region of the United States, you will find many avenues to try your luck at a sport that has been around for many years.

Whether you are taking a vacation or would just like to go out for a day fishing in one of the many desert locations, your options are plentiful.

Fly fishing in the desert southwest is very popular and you couldn’t have picked a better region to try your skills at an ancient sport and way of life, for many.

If you are new to the sport and wondering what you will need for equipment, the answer is quite simple. In essence, fly fishing is a sport wherein fisherman and fisher women catch their prize through the use of artificial flies that are cast out in the water in combination of a fly rod and a fly line.

The flies are made with materials such as fur, hair, and feathers and are then tied together, subsequently attached to a hook with a thread.

Fly fishing can best be described as casting a line rather than a lure, as with the other form of fishing that most people can relate to.

Fly rods come in different shapes and sizes but the parts of the rod are all the same.

There are three types type of string that can be used. The smaller the number indicated on the string refers to how light it is.

Referred to as the fly line, this type is thicker and also heavier than your normal fishing line. It is heavier because you need something that will pull the fly along the water.

Make sure that you know for sure that you are putting the correct end on the fly-rod reel first. Fortunately, most fly lines will have a tag of some sort, indicating which end goes on the reel first.

You can always ask the sporting goods store to assist you. They will likely be more than happy to assist you with the assembly.

The main part of the rod, the central shaft, is commonly known as the rod blank. This is the section where other parts of the rod connect. Many of the rods are made out of graphite, but other materials have been used.

You may also find people referring to the Rod blank as the tip. Note that there is a heavy section on the fly-rod, known as the butt. Generally, blanks are made of graphite but there are still other materials that can be used.

Located at the butt of the fly-rod is the reel seat. The rings found on the seat are designed to lock the reel and the foot in place.

Here are some tips when assembling your reel.

Step 1:

Assemble the fly-rod. Next, attach the reel. (This applies if the the reel and the fly-rod were packaged separately.)

Step 2:

You will notice that there are sections that exist on the rod.

Once again, this heavier section with the grip is referred to as the butt section. The ferrule is the connection between the male and female pieces of the rod.

Step 3:

Place the tip end into the butt end. (If you have multiple pieces, you can start assembling at the tip end of the fly-rod.) Align the guides. These are metal eyelets that the line will be strung through. Ideally, you want to twist the tip end of the fly fishing Arizona rod and then twist it into place.

Begin with the sections offset at an approximate 45-degree angle.

For three-piece rods, connect the top two pieces together. You will assemble this the same way as a two-piece rod.

For four-piece fly-rods, assemble both the top two as well as the bottom two sections and then put them all together.

Be careful when assembling your rod. Don’t push or pull the pieces of the rod as these are delicate.

Step 4:

Make sure the connection between each section tightly fits together. You will want to be able to take it apart without extra effort. Do this carefully to prevent breaking it.

Step 5:

This just might be the most important step. Unless you are ambidextrous, you will want to make sure that you place the reel on your dominant side.

For reference, the reel seat is the part where the reel is attached to the rod. The foot is the area where the bar of the reel runs across the reel.



Posted by Glen